While prepping for gardening this spring, go through some of your old pots and containers. #cbrmr
If you’re a gardener, you most likely have some old pots and containers in your garden shed or even your garage. And you probably didn’t get rid of them because you figured you might have a use for them eventually. While prepping for this spring, instead of buying replacements pots and containers, go through the ones you already have stored. With a little imagination and some supplies, your pots will look better than new in no time!
A good clay pot can be expensive and if dropped, the fall can put a decent size crack in it. If it’s chipped or broken but is still durable, here’s what you can do to fix it:
- You’ll need all-purpose joint compound, spray paint or textured spray paint in a desired color, and fine-grained sandpaper. Clean off the damaged area with the sandpaper. Remove any loose clay as you’re sanding and carefully blow on it to remove the dust. This will let you get a good bond when filling it in.
- Next, using the joint compound, fill in the cracks using a popsicle stick, spreading both inside and outside the pot. Make sure the cracks are well-covered. It dries relatively fast, so spread and smooth it out as you go. It can also be sanded down later if it’s not super smooth. If needed, add more layers until it’s filled. Let it dry for 24 hours and run the sandpaper over it to smooth it out one last time.
- Seal the pot with the spray paint or textured spray paint, let dry, and it’s good to go.
Plastic pots are another type of container commonly used for gardening. The problem with these containers is that the weather can cause them to weaken, discolor, and sometimes crack. Have no fear, these containers can easily be fixed and your favorite plastic container can be used time and time again.
- For this you’ll need clear gorilla tape, spray paint, textured stone paint, and fine-grain sandpaper. First, lightly sand all the areas which you’re planning to tape, so the tape has a good grip when applied. Be sure to remove all the dust from the surface of the pot. If you don’t, when you use the gorilla tape, it will form bubbles because it won’t seal. If you apply some rubbing alcohol before applying the tape, the surface will be clean.
- Next, tape both sides of the crack with strips of gorilla tape. Rub it firmly to get a good seal but don’t use more tape than you need. For edges or curves, use small pieces, that can overlap about a ¼ inch. Try to avoid forming air bubbles.
- Finally, spray the pot with the base paint and then spray it in thin layers with stone texture paint. Allow each coat to dry thoroughly. If the paint bubbles, let the paint cure for 24 hours. Spray it with the textured paint if desired for a different look.
Repurpose With a New Design
You can also repurpose an old pot with designs, like adding a mosaic design. You’ll need a terracotta pot, some broken tile pieces, pot shards or vase filler chips, spray paint and glue. Paint the pot with the spray paint and let dry, then gently glue the tile, shards or chips on one by one in the design of your choice.
You can also add a new design by using lace on a pot or container. All you’ll need is lace of the color of your choice and transparent adhesive. Varnish the pot with the adhesive and paste the lace over it. Let dry and use as desired.
As you can see, upgrading your container and pots for spring can be both fun and easy. What ways have you revamped old containers?